4HP Eurorack Control Deck

£2.49 (Excl. VAT)

Each N8 Eurorack Control Deck cell can hold a 9mm pot, 3.5mm jack, sub-miniature SPDT toggle switch or LED. 


103 × 16 × 2 mm

24 in stock

Make it a module

4HP Eurorack Prototype Kit

£9.99 (Excl. VAT)
Add to basket

6HP Eurorack Prototype Kit

£11.99 (Excl. VAT)
Add to basket

8HP Eurorack Prototype Kit

£13.99 (Excl. VAT)
Add to basket

10HP Eurorack Prototype Kit

£14.99 (Excl. VAT)
Add to basket

The layout of connections arriving from an N8 Synth 4HP 1x6 Eurorack Control Deck to an N8 Synth Solderable Breadboard for Eurorack.

4HP 1x6 Eurorack Control Deck Connections

The six JPS cells on a 4HP 1×6 Eurorack Control Deck allow you to mount a 9mm potentiometer, 3.5mm jack socket, sub-miniature toggle switch or LED. Designed exclusively to partner with our Eurorack Breadboard, N8 Eurorack Control Decks give your DIY synth modules flexible and professional control surfaces. 

Pin headers provide both physical and electrical connectivity between the Control Deck and Breadboard. Components can be mounted on either side of the Control Deck to change the order of the connections arriving at the Breadboard. 

The “D-bus” provides a convenient way to tie ground connections together on the Control Deck, reducing the number of wired connections needed between your circuit and the Breadboard’s edge connector.

Mounting the 4HP 1x6 Eurorack Control Deck

N8 Eurorack Breadboards are attached to N8 Eurorack Control Decks using standard 2.54mm pin headers.

A 40-pin 2.54mm single-row female pin header is soldered to the rear of the Control Deck. We recommend this is done before you mount components to the front of the Control Deck. 

A 40-pin 2.54mm single-row right angle male pin header is soldered to the rear breadboard. For a 4HP module, the male pin header must be mounted on the rear/solder side of the breadboard. This will ensure proper clearance when the module is mounted in your case. We recommend attaching the pin header to the breadboard after all other components have been placed and soldered.

The two pin headers attach the control deck to the breadboard and provide connectivity for the components mounted on the control deck.

Hex nuts, supplied with our pots and 3.5mm jack sockets, attach our pre-drilled 4HP 1×6 Eurorack panel to the jacks and pots on the control deck, completing your Eurorack module. 

A diagram showing a the N8 Synth 4HP 1x6 Eurorack Control Deck connections

Pre-drilled Eurorack Panels

Topping off every DIY synth module crafted with an N8 Eurorack Breadboard is a pre-drilled panel with holes to match the layout of one of our N8 Eurorack Control Decks.

Using our free Eurorack label templates, and an inkjet printer, you can unleash your inner Jony Ive and dress your next DIY Eurorack module to impress.

Download label templates for each panel, then follow our step-by-step guide on making labels for Eurorack panels.

N8 Synth pre-drilled 10HP Eurorack panel with and with out sticker


off, especially for you 🎁

Join the N8 Synth mailing list to receive an exclusive discount and keep up to date on our latest products, tutorials & offers!!

We don’t spam! Read our privacy policy for more info.T&Cs apply.