10HP Header Kit

£2.90 (Excl. VAT)

Headers to connect an N8 Eurorack Control Deck to an N8 Solderable Breadboard for Eurorack.

This kit is suitable for mounting our 10HP 3×6 Control deck.

  • 2x 40 Pin 2.54mm Single Row Female Pin Header
  • 2x 40 Pin 2.54mm Single Row Male Pin Header
  • 1x 16 Pin 2.54mm Double Row Male Pin Header – for Eurorack power connection

33 in stock

Mounting the 10HP 3x6 Eurorack Control Deck

N8 Eurorack Breadboards are connected to N8 Eurorack Control Decks using standard 2.54mm pin headers.

Two 40-pin 2.54mm single-row male pin headers are soldered to the rear of the Control Deck. We recommend this is done before you mount components on the front of the Control Deck. 

Two 40-pin 2.54mm single-row female pin headers are soldered to the front/component side of the breadboard. We recommend attaching the pin headers to the breadboard after all other components have been placed and soldered.

The four-pin headers attach the control deck to the breadboard and provide connectivity for the components mounted on the control deck.

Hex nuts, supplied with our pots and 3.5mm jack sockets, attach our pre-drilled 10HP 3×6 Eurorack panel to the jacks and pots on the Control Deck, completing your module. 

A diagram showing a the N8 Synth 10HP 3x6 Eurorack Control Deck connections