Pin Headers

£0.10£0.60 (Excl. VAT)

Pin headers for connecting N8 Control Decks to solderable Eurorack breadboards and of course Eurorack power.

  • Pitch: 2.54mm
  • Rows: Various
  • Columns: Various

Mounting the 4HP 1x6 Eurorack Control Deck

N8 Eurorack Breadboards are attached to N8 Eurorack Control Decks using standard 2.54mm pin headers.

A 40-pin 2.54mm single-row female pin header is soldered to the rear of the Control Deck. We recommend this is done before you mount components to the front of the Control Deck. 

A 40-pin 2.54mm single-row right angle male pin header is soldered to the rear breadboard. For a 4HP module, the male pin header must be mounted on the rear/solder side of the breadboard. This will ensure proper clearance when the module is mounted in your case. We recommend attaching the pin header to the breadboard after all other components have been placed and soldered.

The two pin headers attach the control deck to the breadboard and provide connectivity for the components mounted on the control deck.

Hex nuts, supplied with our pots and 3.5mm jack sockets, attach our pre-drilled 4HP 1×6 Eurorack panel to the jacks and pots on the control deck, completing your Eurorack module. 

A diagram showing a the N8 Synth 4HP 1x6 Eurorack Control Deck connections

Mounting the 10HP 3x6 Eurorack Control Deck

N8 Eurorack Breadboards are connected to N8 Eurorack Control Decks using standard 2.54mm pin headers.

Two 40-pin 2.54mm single-row male pin headers are soldered to the rear of the Control Deck. We recommend this is done before you mount components on the front of the Control Deck. 

Two 40-pin 2.54mm single-row female pin headers are soldered to the front/component side of the breadboard. We recommend attaching the pin headers to the breadboard after all other components have been placed and soldered.

The four-pin headers attach the control deck to the breadboard and provide connectivity for the components mounted on the control deck.

Hex nuts, supplied with our pots and 3.5mm jack sockets, attach our pre-drilled 10HP 3×6 Eurorack panel to the jacks and pots on the Control Deck, completing your module. 

A diagram showing a the N8 Synth 10HP 3x6 Eurorack Control Deck connections

10%

off, especially for you 🎁

Join the N8 Synth mailing list to receive an exclusive discount and keep up to date on our latest products, tutorials & offers!!

We don’t spam! Read our privacy policy for more info.T&Cs apply.