An N8 Synth 8HP 2x5 Eurorack Control Deck which allows a mix of 10 jacks, pots, switches or leds to connect to an N8 Synth Solderable Breadboard for Eurorack. Viewed from the front.
8HP Eurorack Control Deck £4.49 (Excl. VAT)
Back to products
3D rendering of an N8 Synth Eurorack Prototype Kit
4HP Eurorack Prototype Kit £9.99 (Excl. VAT)
9mm Potentiometer Round Shaft - Image 1
9mm Potentiometer Round Shaft - Image 2
9mm Potentiometer Round Shaft - Image 3
9mm Potentiometer Round Shaft - Image 4
    9mm Potentiometer Round Shaft
    9mm Potentiometer Round Shaft - Image 2
    9mm Potentiometer Round Shaft - Image 3
    9mm Potentiometer Round Shaft - Image 4

    9mm Potentiometer Round Shaft

    £1.19 (Excl. VAT)

    • Tolerance: ±20%
    • Taper: Linear
    • Power Rating: 0.05W
    • Shaft: Metal Round
    • Shaft Diameter: 6.35mm
    • Shaft Length: 10mm+5mm
    • Length of thread : 5mm
    • Mounting Hole: 7.5mm
    • Base Width: 9.5mm
    • Rotation angle: 300° ± 10°
    Dimensions9 × 12 × 23 mm

    Don't forget knobs

    N8 Synth Eurorack Control Decks are designed to accommodate knobs of up to 12mm in diameter. When using a round shaft pot Davies 1900H style knob are a great choice.

    Shop for Knobs

    Mounting RD901F-40 style potentiometers

    RD901F-40 style potentiometers with tabs tucked under to avoid short circuits.

    N8 Eurorack Control Decks provide a grid of JPS cells. Each cell can host a 3.5mm jack socket, 9mm potentiometer, SPDT switch or LED.

    If not perfectly aligned, the two supporting tabs at the front and rear of an RD901F-40 style pot could short circuit pins 1 & 2 through contact with the pads used to mount 3.5mm jacks.

    It is recommended that these tabs be bent up under the pot’s body, providing clearance to the unused pads below.Â