Tactile Switches & Switch Caps
Price range: £0.25 through £0.50 (Excl. VAT)
Tactile switches and tactile switch caps compatible with N8 Control Decks and panels.
- Circuit: SPST-NO
- Switch Function: Off-Mom
- Mounting: Through Hole ( 2-pin)
- Rated voltage/current: DC 12V / 0.5A
- Size: 6x6mm
| Dimensions | N/A |
|---|
Mounting a 6mm tactile switch
N8 Eurorack Control Decks provide a grid of JPS cells. Each cell can host a 3.5mm jack socket, 9mm potentiometer, SPDT switch, LED or 6mm x 6mm momentary tactile switch.
N8 Eurorack Control Decks can accept 2-pin 6mm x 6mm tactile switches
Tactile switches are mounted using the vertical “ABC” pads, with one pin soldered to the lower hole of the “A” pad and the other to the “B” pad.
The switch’s connections appear at the Control Deck’s edge connector, as indicated on the board’s rear.
N8 pre-drilled Eurorack Panels have 7mm diameter holes to accept a range of components in each position.Â
For perfect alignment, position the tactile switch and other components on your N8 Eurorack Control Deck and affix the panel using the bolt-in components before soldering.
Check that your switches are square to the Control Deck and centred in the holes. Adjust as needed before soldering into position.