10HP Eurorack Prototype Kit

£14.99 (Excl. VAT)

Everything  you need to start building a 10HP Eurorack module

  • 1x Solderable Breadboard for Eurorack with a power header
  • 1x 10HP 3×6 Eurorack Control Deck
  • 1x 10HP 3×6 Pre-drilled Eurorack Panel
  • 1x 16 Pin Eurorack power header
  • 2x 40Pin Male Header
  • 2x 40Pin Female Header

Learn more in the Quick Start Guide

14 in stock

A Breadboard for Eurorack

N8 Eurorack Breadboards follow the basic layout of a sprung, solderless breadboard, but we’ve slimmed things down by combining the ground and +/-12V power rails in a space-saving alternating pattern. Running along the left-hand side is the +12V power rail and the -12V power rail on the right. 

Outside of the two power rails are the two edge connectors. The edge connectors allow N8 Eurorack Breadboards to be stacked using standard 2.54mm pin headers for complex 10HP modules or mounted at 90 degrees to an N8 Control Deck for petite 4HP, 6HP, and 8HP modules.

Available with or without provision to host a standard 16 Pin Eurorack power connection and filter capacitors. 

The layout of the N8 Synth Solderable Breadboard for Eurorack showing the compact power rails, edge connectors and Eurorack power header with filter capacitors

The layout of connections arriving from an N8 Synth 10HP 3x6 Eurorack Control Deck

10HP 3x6 Eurorack Control Deck Connections

The eighteen JPS cells on a 10HP 3×6 Eurorack Control Deck allow you to mount a 9mm potentiometer, 3.5mm jack socket, sub-miniature toggle switch or LED. Designed exclusively to partner with our Eurorack Breadboard, N8 Eurorack Control Decks give your DIY Eurorack modules flexible and professional control surfaces. 

Pin headers provide physical and electrical connectivity between the Control Deck and Breadboard. Components can be mounted on either side of the Control Deck to change the order of the connections arriving at the breadboard. 

The “D-Bus” provides a convenient way to tie ground connections together on the Control Deck, reducing the number of wired connections needed between your circuit and the breadboard’s edge connector.


Mounting the 10HP 3x6 Eurorack Control Deck

N8 Eurorack Breadboards are connected to N8 Eurorack Control Decks using standard 2.54mm pin headers.

Two 40-pin 2.54mm single-row male pin headers are soldered to the rear of the Control Deck. We recommend this is done before you mount components on the front of the Control Deck. 

Two 40-pin 2.54mm single-row female pin headers are soldered to the front/component side of the breadboard. We recommend attaching the pin headers to the breadboard after all other components have been placed and soldered.

The four-pin headers attach the control deck to the breadboard and provide connectivity for the components mounted on the control deck.

Hex nuts, supplied with our pots and 3.5mm jack sockets, attach our pre-drilled 10HP 3×6 Eurorack panel to the jacks and pots on the Control Deck, completing your module. 

A diagram showing a the N8 Synth 10HP 3x6 Eurorack Control Deck connections

Pre-drilled Eurorack Panels

Topping off every DIY synth module crafted with an N8 Eurorack Breadboard is a pre-drilled panel with holes to match the layout of one of our N8 Eurorack Control Decks.

Using our free Eurorack label templates, and an inkjet printer, you can unleash your inner Jony Ive and dress your next DIY Eurorack module to impress.

Download label templates for each panel, then follow our step-by-step guide on making labels for Eurorack panels.

N8 Synth pre-drilled 10HP Eurorack panel with and with out sticker

10%

off, especially for you 🎁

Join the N8 Synth mailing list to receive an exclusive discount and keep up to date on our latest products, tutorials & offers!!

We don’t spam! Read our privacy policy for more info.T&Cs apply.