10HP Eurorack Control Deck
£4.99 (Excl. VAT)
Each N8 Eurorack Control Deck cell can hold a 9mm pot, 3.5mm jack, sub-miniature SPDT toggle switch or LED.Â
- Designed exclusively to partner with the N8 Eurorack Breadboard
- Available in 4HP – 10HP widths
| Dimensions | 103 × 49.5 × 1.6 mm |
|---|
63 in stock
10HP 3x6 Eurorack Control Deck Connections
The eighteen JPS cells on a 10HP 3×6 Eurorack Control Deck allow you to mount a 9mm potentiometer, 3.5mm jack socket, sub-miniature toggle switch or LED. Designed exclusively to partner with our Eurorack Breadboard, N8 Eurorack Control Decks give your DIY Eurorack modules flexible and professional control surfaces.Â
Pin headers provide physical and electrical connectivity between the Control Deck and Breadboard. Components can be mounted on either side of the Control Deck to change the order of the connections arriving at the breadboard.Â
The “D-Bus” provides a convenient way to tie ground connections together on the Control Deck, reducing the number of wired connections needed between your circuit and the breadboard’s edge connector.
Mounting the 10HP 3x6 Eurorack Control Deck
N8 Eurorack Breadboards are connected to N8 Eurorack Control Decks using standard 2.54mm pin headers.
Two 40-pin 2.54mm single-row male pin headers are soldered to the rear of the Control Deck. We recommend doing this before mounting components on the front.Â
Two 40-pin 2.54mm single-row female pin headers are soldered to the front/component side of the breadboard. We recommend attaching the pin headers to the breadboard after all other components have been placed and soldered.
The four-pin headers attach the control deck to the breadboard and provide connectivity for the components mounted on the control deck.
Hex nuts, supplied with our pots and 3.5mm jack sockets, attach our pre-drilled 10HP 3×6 Eurorack panel to the jacks and pots on the Control Deck, completing your module.Â
Pre-drilled Eurorack Panels
Topping off every DIY synth module crafted with an N8 Eurorack Breadboard is a pre-drilled panel with holes to match the layout of one of our N8 Eurorack Control Decks.
Using our free Eurorack label templates, and an inkjet printer, you can unleash your inner Jony Ive and dress your next DIY Eurorack module to impress.
Download label templates for each panel, then follow our step-by-step guide on making labels for Eurorack panels.
